CEL Robox Dual build




  • Step 1. Print the adapters
    For the CEL Robox Dual, you will need to print these parts, already oriented as needed. Here are a few recommendations for printing:

    File Material Layer Height Supports Infill Download
    AdapterCelRobox1.STL ABS 0.1 YES HIGH file_download
    AdapterCelRobox2.STL ABS 0.1 YES HIGH file_download


  • Step 2. Installing the Robox Adapter
    Install the Robox adapter on your printer.

  • Step 3. Installing the Hose
    Insert the hose into the Robox adapter and plug the other side of the hose into Zimpure.

  • Step 4. Operating instruction (IMPORTANT)
    Here you go, your Zimpure is ready to filter!

    You need to turn it ON only after than your Robox has started to print.

    Please verify how the beginning of the first layer goes. You are now all set up to print safely, without any toxic emissions. You can see how Zimpure is efficient by smelling on the top of your Robox. No more bad and hazardous ABS smelt!

    Happy safe printing!

Any idea/suggestion? Something is not clear? Please send us an email!