Prusa Type instructions build

  • Step 1. Print the adapters
    You will need to print this little part, already oriented. Here are a few recommendations for printing:

    File Material Layer Height Supports Infill Download
    PrusaSuctionHead ABS 0.19 NO HIGH file_download

    Creative Commons License
    This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

    This print is your last one without Zimpure!
  • Step 2. Installing the PrusaSuctionHead
    Use one back to back Velcro tape to tighten the PrusaSuctionHead to the extruder.

  • Step 3. Installing the Hose
    Insert the hose into the PrusaSuctionHead and plug it to Zimpure.

  • Step 4. Operating instruction (IMPORTANT)
    Here you go, your Zimpure is ready to filter!

    You need to turn it ON only after than your Prusa has started to print.

    Please verify how the beginning of the first layer goes. You are now all set up to print safely, without any toxic emissions. You can see how Zimpure is efficient by smelling on the top of your Prusa. No more bad and hazardous ABS smelt!

    Happy safe printing!

Any idea/suggestion? Something is not clear? Please send us an email!