update Updated: 11/15/2018

Zimpure - CEL Robox instructions build


supervisor_account To speak with the Zimple community about this printer, suction head compatibility or improvements, you can join the Discord channel for this printer.






  • Step 1. Print the adapters


    For the CEL Robox, you will need to print these files, already oriented as needed. Here are a few recommendations for printing: 

    File Material Layer Height Supports Infill Download
    STLAdapterCel1.STL ABS 0.1 YES HIGH
    file_download
    STLAdapterCel2.STL ABS 0.1 YES HIGH
    file_download

    Creative Commons License
    This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.


    This is your last print without Zimpure!

  • Step 2.Installing the Robox Adapter

    First, install the CEL Robox suction head that you downloaded above on your extruder.

    Robox/imgStep/Robox/RoboxZimpure_2.jpg
    Robox/imgStep/Robox/RoboxZimpure_3.jpg
  • Step 3.Installing the Hose

    Insert the hose into CEL Robox holder and plug the other side of the hose into Zimpure.

    Robox/imgStep/Robox/RoboxZimpure_1.jpg
    Robox/imgStep/Robox/RoboxZimpure_4.jpg
  • Step 4. Operating Instruction

    Here you go, your Zimpure is ready to filter! You need to turn it ON only after than your Robox has started to print. Please verify how the beginning of the first layer goes. You are now all set up to print safely, without any toxic emissions. Happy safe printing!