update Updated: 11/15/2018

Zimpure - FlashForge Dreamer instructions build

supervisor_account To speak with the Zimple community about this printer, suction head compatibility or improvements, you can join the Discord channel for this printer.

update The FlashForge Dreamer suction head is almost finished : it requires a few adjustments from the FlashForgeCreator Pro suction head. If you want to help us make it compatible quickly, visit this page or send us un email at nicolas@zimple3d.com

  • Step 1. Print the adapters

    For the FlashForge Dreamer, you will need to print these files, already oriented as needed. Here are a few recommendations for printing: 

    File Material Layer Height Supports Infill Download
    STLFinderFlashForgeFinderSuctionHead.STL ABS 0.1 YES HIGH

    Creative Commons License
    This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

    This is your last print without Zimpure!

  • Step 2. Installing the FlashForge Dreamer Suction Head

    First, install the FlashForge Dreamer suction head that you downloaded above on your extruder.

  • Step 3. Installing the Hose

    Then, insert the hose into the Dreamer Suction Head and plug the other side of the hose into Zimpure. 

  • Step 4. Operating Instruction

    Here you go, your Zimpure is ready to filter! You need to turn it ON only after than your Dreamer has started to print. Please verify how the beginning of the first layer goes. You are now all set up to print safely, without any toxic emissions. Happy safe printing!