update Updated: 11/15/2018

Zimpure - FlashForge Finder instructions build


supervisor_account To speak with the Zimple community about this printer, suction head compatibility or improvements, you can join the Discord channel for this printer.



update This suction head is currently being tested by one of our customer. More photos are coming soon.



  • Step 1. Print the adapters


    For the FlashForge Finder, you will need to print these files, already oriented as needed. Here are a few recommendations for printing: 

    File Material Layer Height Supports Infill Download
    STLFlashForgeHoseHolder.STL ABS 0.1 YES HIGH
    file_download
    STLFlashForgeSuctionHead.STL ABS 0.1 YES HIGH
    file_download

    Creative Commons License
    This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.


    This is your last print without Zimpure!

  • Step 2. Installing the FlashForge Finder Suction Head

    First, install the FlashForge Finder suction head that you downloaded above on your extruder.

    Finder/imgStep/Finder/FFFinder1.PNG
    Finder/imgStep/Finder/FFFinder2.PNG
  • Step 3. Installing the Hose

    Then, insert the hose into the Finder Suction Head and plug the other side of the hose into Zimpure. 

  • Step 4. Operating Instruction

    Here you go, your Zimpure is ready to filter! You need to turn it ON only after than your Finder has started to print. Please verify how the beginning of the first layer goes. You are now all set up to print safely, without any toxic emissions. Happy safe printing!