update Updated: 11/16/2018

Zimpure - LulzBot Taz6 instructions build


supervisor_account To speak with the Zimple community about this printer, suction head compatibility or improvements, you can join the Discord channel for this printer.



update This suction head is waiting for validation and we can't guarantee that it will fit well to your machine for the moment. If you have tested it, we are waiting for your feedbacks and photos to confirm the compatibility.



  • Step 1. Print the adapters


    For the LulzBot Taz6, you will need to print these files, already oriented as needed. Here are a few recommendations for printing: 

    File Material Layer Height Supports Infill Download
    STLTaz5TazSuctionHead.STL ABS 0.1 YES HIGH
    file_download

    Creative Commons License
    This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.


    This is your last print without Zimpure!

  • Step 2. Installing the LulzBot Taz6 Suction Head

    First, install the LulzBot Taz6 suction head that you downloaded above on your extruder.

    Taz6/imgStep/Taz6/TAZ6.PNG
    Taz6/imgStep/Taz6/TAZ62.PNG
  • Step 3. Installing the Hose

    Then, insert the hose into the Taz6 Suction Head and plug the other side of the hose into Zimpure. 

  • Step 4. Operating Instruction

    Here you go, your Zimpure is ready to filter! You need to turn it ON only after than your Taz6 has started to print. Please verify how the beginning of the first layer goes. You are now all set up to print safely, without any toxic emissions. Happy safe printing!