update Updated: 11/15/2018

Zimpure - M3D Micro instructions build


supervisor_account To speak with the Zimple community about this printer, suction head compatibility or improvements, you can join the Discord channel for this printer.






  • Step 1. Print the adapters


    For the M3D Micro, you will need to download your suction head on Thingiverse here

    Creative Commons License
    This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.


    This is your last print without Zimpure!

  • Step 2.Installing the M3D Micro Suction Head

    First, install the M3D Micro suction head that you downloaded above on your extruder.

    Micro/imgStep/Micro/M3DMicro1.jpg
    Micro/imgStep/Micro/M3DMicro2.jpg
  • Step 3. Installing the Hose

    Then, insert the hose into the Micro Suction Head and plug the other side of the hose into Zimpure. 

  • Step 4. Operating Instruction

    Here you go, your Zimpure is ready to filter! You need to turn it ON only after than your Micro has started to print. Please verify how the beginning of the first layer goes. You are now all set up to print safely, without any toxic emissions. Happy safe printing!