update Updated: 11/15/2018

Zimpure - MakerBot Replicator2 instructions build

supervisor_account To speak with the Zimple community about this printer, suction head compatibility or improvements, you can join the Discord channel for this printer.

update This suction head doesn't fit well to the machine for the moment. If you have tested it, we are waiting for your feedbacks and photos to make the suction head compatible as soon as possible.

  • Step 1. Print the adapters

    For the MakerBot Replicator2, you will need to print these files, already oriented as needed. Here are a few recommendations for printing: 

    File Material Layer Height Supports Infill Download
    STLREP2SuctionHead.STL ABS 0.1 YES HIGH

    Creative Commons License
    This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

    This is your last print without Zimpure!

  • Step 2. Installing the MakerBot Replicator2 Suction Head

    First, install the MakerBot Replicator2 suction head that you downloaded above on your extruder.

  • Step 3. Installing the Hose

    Then, insert the hose into the Replicator2 Suction Head and plug the other side of the hose into Zimpure. 

  • Step 4. Operating Instruction

    Here you go, your Zimpure is ready to filter! You need to turn it ON only after than your Replicator2 has started to print. Please verify how the beginning of the first layer goes. You are now all set up to print safely, without any toxic emissions. Happy safe printing!