update Updated: 11/15/2018

Zimpure - Ultimaker 2plus instructions build


supervisor_account To speak with the Zimple community about this printer, suction head compatibility or improvements, you can join the Discord channel for this printer.






  • Step 1. Print the adapters


    For the Ultimaker 2plus, you will need to print these files, already oriented as needed. Here are a few recommendations for printing: 

    File Material Layer Height Supports Infill Download
    STLOriginal+Holder.stl Flexible 0.1 YES HIGH
    file_download
    STLOriginal+Tube.stl Flexible 0.1 YES HIGH
    file_download

    Creative Commons License
    This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.


    This print is your last one without Zimpure! 

    Thanks to Oscar Galego from bikespot for this nice design!

  • Step 2.Installing the Ultimaker 2+ Suction Head

    First, install the Ultimaker 2plus suction head that you downloaded above on your extruder.

    2plus/imgStep/2plus/U2P1.jpeg
    2plus/imgStep/2plus/U2P2.jpeg
    2plus/imgStep/2plus/U2P3.jpeg
  • Step 3.Installing the Hose

    Insert the hose into Ultimaker 2plus holder and plug the other side of the hose into Zimpure.

    2plus/imgStep/2plus/U2P4.jpeg
    2plus/imgStep/2plus/U2P6.jpeg
  • Step 4. Operating Instruction

    Here you go, your Zimpure is ready to filter! You need to turn it ON only after than your 2plus has started to print. Please verify how the beginning of the first layer goes. You are now all set up to print safely, without any toxic emissions. Happy safe printing!